Touareg V6-3.2L (BMX) (2005)
/Page-2489002.png)
^
M6 x 20
^
8 Nm
12- Bracket
13- Bracket
14- Rubber bushing
15- Bushing
16- Hex bolt
^
M6 x 30
^
10 Nm
17- Cable tie
18- Hydraulic line
^
15 Nm
CAUTION! Strictly adhere to the tightening torque, otherwise the valve housing can distort. Thereby, the valve piston in the valve housing
would no longer move freely.
^
When pressure is increased in this line, the claw coupling in stabilizer bar at rear axle opens
19- Hydraulic line
^
15 Nm
CAUTION! Strictly adhere to the tightening torque, otherwise the valve housing can distort. Thereby, the valve piston in the valve housing
would no longer move freely.
^
When pressure is increased in this line, the claw coupling in stabilizer bar at the rear axle closes
20- Hydraulic line
^
15 Nm
CAUTION! Strictly adhere to the tightening torque, otherwise the valve housing can distort. Thereby, the valve piston in the valve housing
would no longer move freely.
^
When pressure is increased in this line, the claw coupling in stabilizer bar at the front axle opens
21- Hydraulic line
^
15 Nm
CAUTION! Strictly adhere to the tightening torque, otherwise the valve housing can deform. Thereby, the valve piston in the valve housing
would no longer move freely.
^
When pressure is increased in this line, the claw coupling in stabilizer bar at front axle closes.
22- Adapter
23- Nut
^
9 Nm
24- Hydraulic line
^
15 Nm
^
When pressure is increased in this line, the claw coupling in stabilizer bar at front axle closes
25- Hydraulic line
^
15 Nm
^
When pressure is increased in this line, the claw coupling in stabilizer bar at front axle opens
26- Hydraulic line
^
15 Nm
^
When pressure is increased in this line, the claw coupling in stabilizer bar at rear axle closes
27- Hydraulic line
^
15 Nm
^
When pressure is increased in this line, the claw coupling in stabilizer bar at rear axle opens
28- Gasket
29- Nut
^
10 Nm
30- Rubber bushing
^
With locking compound D 185 400 A2 on threads, fasten into engine pump assembly hand-tight
Air Supply Unit, Servicing
Air supply unit, servicing
Assembly overview
^
The gray piston ring, installed before VIN WVGLG77L05D072104, is replaced by the brown piston ring.
