Touareg V6-3.2L (BMX) (2005)
/Page-1727008.png)
Due to the CAN bus system, fault messages will be stored in various Control Modules during programming.
-
To erase ALL fault memories, confirm by selecting the right arrow button.
This will take a few minutes, depending on how many control modules are accessed.
Once fault memories have been erased:
^
Similar screen appears.
^
Old TCM Part No. and software level still appear at (arrow)
^
Function ended appears at bottom of screen.
-
Finish update of the TCM by selecting the left arrow button.
