Touareg V6-3.2L (BMX) (2005)
Control Unit: Service and Repair
Differential Lock Control Module
Differential Lock Control Module
Removing
-
First check whether a coded radio is installed. In this case, find out anti theft coding.
-
Switch the ignition and all electrical consumers off, and remove the ignition key.
-
Disconnect the ground terminal connector from the battery.
-
Remove left rear side trim.
With 4 Zone Climatronic
-
Move the rear auxiliary heater and air conditioner unit into the service position.
Continuation for All
-
Separate the connector - 1 - at differential lock control module (J647).
-
Remove the bolt - 2 -.
-
Unclip holder with differential lock control module (J647) - 3 - from structure - arrows - and remove holder with differential lock control module
(J647).
Installing
Install in reverse sequence; note the following points:
-
First, clip the holder with differential lock control module (J647) - 3 - into structure - arrows -.