Touareg V8-4.2L (AXQ) (2006)
/Page-2565002.png)
To install, perform the steps used for removal in reverse order.
-
Together with a second technician, slide the cover into the guides. Hold it parallel.
-
Depending on vehicle equipment, connect wiring harnesses of electrical components installed.
-
Tighten the screws, tightening specification, refer to--> [ Bumper Cover Assembly Overview ] See: Service and Repair/Rear Bumper Overview.
‹› If the vehicle has lane change assist, then the control modules - 5 - must be calibrated when the work is completed.
