Touareg V8-4.2L (AXQ) (2006)
/Page-2730002.png)
‹› Locking tabs - 1 - and - 2 - are not visible when cover - 3 - is installed. Use, for example, a knife blade to release them.
-
Slide cover - 3 - upward in - direction of arrow - and disconnect cover from center armrest.
-
Remove four bolts - 4 -.
-
Separate center armrest from hinge plate - 6 - near fastening locations - 5 -.
-
Press locking lever - 1 - down until it is held with the catch - 2 -.
‹› Buttons - 3 - and - 4 - sit on a shaft and must be removed at the same time.
-
Remove buttons - 3 - and - 4 - simultaneously in - direction of arrow - from center armrest mount.
‹› When installing, ensure springs - 7 - are positioned correctly.
