Touareg V8-4.2L (AXQ) (2006)
/Page-619001.png)
Camshaft Bearing: Specifications
Camshaft Bearing Cap
Install bearing caps - 3 -, - 5 - and - 7 - according to markings and fasten new bolts alternately in a diagonal sequence.
Torque specification ................................................................................................................................................................. 5 Nm + 1/4 turn (90°)
Tighten the camshaft adjuster - 10 -.
Torque specification ................................................................................................................................................................. 5 Nm + 1/4 turn (90°)
Lightly coat the double bearing cap - 6 - and the bearing cap - 1 - with sealant AMV 188 001 02 and install the bearing caps.
Torque specification ................................................................................................................................................................. 5 Nm + 1/4 turn (90°)
Install the remaining bearing caps.
Torque specification ................................................................................................................................................................. 5 Nm + 1/4 turn (90°)
