Touareg V8-4.2L (AXQ) (2006)
-
Remove mounting bolts of camshaft adjuster.
-
Remove bearing cap - 1 -.
-
Remove bearing caps - 2 -, - 4 -, - 6 -, - 8 - and - 9 - and lay on a clean surface in correct order.
-
Loosen bearing caps - 3 -, - 5 - and - 7 - alternately in a diagonal sequence, and remove.
-
Remove both camshafts with camshaft adjusters and place on a clean surface.
Installing
-
Replace half-round sealing plugs.
-
Replace gasket for camshaft adjuster.
-
Lightly coat shaded area with sealant (AMV 188 001 02).
-
Place camshaft roller chain onto camshaft drive sprockets as follows.
When re-using camshaft roller chain
-
Move color markings to congruency - arrows -.