Touareg V8-4.2L (AXQ) (2006)
-
Tighten camshaft adjuster - 10 -. Torque specification: 5 Nm plus an additional 1/4 turn (90°)
-
Install chain tensioner.
-
Verify TDC position of camshafts. The markings on camshafts must be aligned with both arrows on bearing cap - arrows -.
‹› So that both markings line up, turn camshaft slightly back and forth if necessary.
-
Lightly coat double bearing cap - 6 - and bearing cap - 1 - using sealant (AMV 188 001 02) --> [ Lightly coat separation surfaces of front and rear
bearing caps with before installing ] and install bearing caps. Torque specification: 5 Nm plus an additional 1/4 turn (90°)