Touareg V8-4.2L (AXQ) (2006)
/Page-631002.png)
7 - 10 Nm
8 - 15 Nm
9 - Cylinder block
10 - Oil pan
11 - Bolt
^
M7 = 15 Nm
^
M8 = 22 Nm
12 - Roller chain
^
Before removing, mark the direction of rotation, e.g. with paint
^
Do not mark using a center punch or similar means
13 - Chain sprocket
^
For crankshaft
14 - Thrust collar
^
If signs of wear exist, pull off and turn around or replace
15 - Gasket
^
Replace
16 - Sealing flange (belt pulley side)
^
Must be located on alignment bushings
^
Before installing, remove oil remains from crankshaft journal with a clean cloth
17 - O-ring
^
Replace
18 - Spray nozzle valve, 35 Nm
19 - Seal
20 - Crankshaft toothed belt sprocket
^
Only possible to install in one position
^
To remove, lock crankshaft using crankshaft holder 3242
21 - 200 Nm plus an additional 1/2 turn (180°)
^
Replace
^
Do not add lubricant
^
Additional rotation can occur in several stages
22 - Vibration damper/belt pulley
^
For ribbed belt
^
To remove, lock crankshaft using crankshaft holder 3242
23 - 22 Nm
24 - 25 Nm
25 - Cover
