volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Assembly Carrier|Page 11650 > < Assembly Carrier|Page 11648
Page 29
background image

-

Release and disconnect connector - 2 - and remove Front Passenger's Airbag -Off- Key Switch (E224) - 1 - from vehicle.

Installing

Install in reverse order of removal.

Glove Compartment Lamp

Instrument Panel Lamps and Switches

Glove Compartment Lamp

CAUTION!
When removing and installing components in visible area (switches,  covers, trim, etc.), cover by taping the areas at which a prying tool
(plastic  wedge, screwdriver) will be positioned using commercially available adhesive  tape.

Removing

-

Switch off ignition, switch off all electrical consumers and remove  ignition key.

-

Carefully pry out Glove Compartment Lamp (W6) using a screwdriver.

-

Release the connector and disconnect it.

Bulb, replacing

-

Disengage retaining tabs - 1 - and remove heat shield -  2 - from diffusion lens of Glove Compartment Lamp (W6).

Assembly Carrier|Page 11650 > < Assembly Carrier|Page 11648