Touareg V8-4.2L (AXQ) (2006)
/Page-870004.png)
If indication jumps to approx. -40° C:
-
End diagnosis and switch ignition off.
-
Replace Mass Air Flow (MAF) Sensor (G70).
‹› The Intake Air Temperature (IAT) Sensor (G42) is a component of the Mass Air Flow (MAF) Sensor (G70) and cannot be replaced individually.
-
Erase DTC memory of Engine Control Module (ECM) , Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.
If indication remains at approx. 140° C:
-
End diagnosis and switch ignition off.
-
Check wires according to wiring diagram.
Checking wiring
-
Connect test box to control module wiring harness , connect test box for wiring test.
-
Check wires between test box and 5-pin connector for open circuit according to wiring diagram.
Terminal 1+socket 26
Terminal 3 + socket 27
Wire resistance: max. 1.5 ohms
