Touareg V8-4.2L (AXQ) (2006)
Headlamp Alignment Control Module: Service and Repair
Headlamp Range/Cornering Lamp Control Module J745
Headlamp Range/Cornering Lamp Control Module J745
Removing and installing Headlamp Range/Cornering Lamp Control Module J745
Special tools, testers and auxiliary items required
-
Release lever T10039
-
Wedge T10039/1
NOTE: Removal of the steering wheel is not necessary. To improve clarity, the steering wheel is not shown in the following illustrations.
Removing:
-
Switch off ignition, switch off all electrical components and remove ignition key.
-
In vehicles without radio/navigation system or without radio, pry cover -1 - out of mounts using trim removal wedge T10039/1.
-
If necessary, remove radio - 2 -.
-
If necessary, remove radio/navigation system - 3 -.
-
Remove all switches in instrument panel center.
-
Remove A/C control head - 4 -.
-
Remove side instrument cluster cover on front passengers side.
-
Remove cover in footwell on drivers side.