Touareg V8-4.2L (AXQ) (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Seals, Replacing
Special tools, testers and auxiliary items required
‹› Seal remover (2085)
‹› Seal installer (3241)
Work procedure
Left cylinder head
-
Pull connectors off from ignition coils and fuel injectors and lay wiring harness aside.
-
Disconnect connector from Camshaft Position (CMP) Sensor.
-
Remove Camshaft Position (CMP) Sensor housing with cover and cone.
On right of cylinder head
-
Remove right toothed belt cover.
-
Disconnect connector from Camshaft Position (CMP) Sensor.
-
Remove bolts - 1 - from Camshaft Position (CMP) Sensor.
-
Remove bolts - 2 - from rear toothed belt cover.
-
Pull rear toothed belt cover slightly forward and remove Camshaft Position (CMP) Sensor housing with cover and cone.
Continuation for both cylinder heads
-
Install adapter (2085/1) as shown.