Touareg V8-4.2L (AXQ) (2006)
-
Connect battery ground (GND) strap.
Side Airbag Crash Sensors
Side Airbag Crash Sensors
‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
CAUTION!
Observe safety precautions for working on airbags --> [ Airbag Safety Precautions ] See: Restraint Systems/Air Bag Systems/Service
Precautions/Technician Safety Information.
-
Remove belt anchor --> [ Belt Anchor ] See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Belt Anchor.
-
Remove front seat:
‹› Remove seat --> [ Front Seat ] See: Body and Frame/Seats/Service and Repair/Front Seats.
-
Remove seat base --> [ Seat Base ] See: Body and Frame/Seats/Service and Repair/Front Seats.
-
Remove floor covering in area of side crash sensors.
-
Remove the two bolts - 1 - (9 Nm).
-
Disconnect the wiring harness - 3 - from the crash sensor - 2 -.