Touareg V8-4.2L (AXQ) (2006)
/Page-1992004.png)
Lines and wires must not be mixed up when connecting!
-
Check whether color marking is present on front in driving direction. If no longer present, apply a new one.
-
When loosening hydraulic lines, counter hold using open end wrench.
Continuation for All
-
Hook spindles (10-222 A/11) in eyelets - arrow - of engine carrier on left and right vehicle sides.
-
Place one wood block - A - of approximately 300 mm in length in each bracket of spindles (10-222 A/11).
