Touareg V8-4.2L (AXQ) (2006)
‹› Always replace.
7
Shock absorber
8
Seal
‹› Always replace.
Vehicle Level Sensor Bracket, with Air Spring Damper
Vehicle Level Sensor Bracket, with Air Spring Damper
Removing
CAUTION!
Before starting work, stabilizer bars must be coupled in vehicles with separable stabilizer bars. Otherwise, there is the danger of injury
caused by unintentional separation.
-
Remove the front wheel housing liner.
-
Disconnect the connector - 4 - from the vehicle level sensor - 3 -.
-
Remove the pin in - direction of arrow - and unclip the connecting link from the upper control arm.
-
Remove the front air spring damper. Refer to --> [ Air Spring Damper ] See: Front Suspension/Air Spring Damper.
-
Remove the bracket from the mounting bracket. Refer to --> [ Front Suspension Assembly Overview ] See: Service and Repair/Removal and
Replacement/Front Suspension.
Installing
Installation is the reverse of removal, with special attention to the following:
The level control system sensor bracket must be against mounting bracket tab - arrow -.