Touareg V8-4.2L (AXQ) (2006)
/Page-2041008.png)
Installation is performed in the reverse order of removal.
Tightening Specifications
Strut Assembly Overview
Strut Assembly Overview
‹› If components with bonded rubber bushings were replaced or bolts/nuts on these components were loosened, corresponding wheel bearing must
be lifted into curb weight position. Refer to --> [ Lifting Wheel Bearing to Curb Weight Position ] See: Alignment/Service and Repair/Front
Suspension (AWD).
1
Self locking nut
‹› M14 x 1.5.
‹› 60 Nm.
‹› Always replace after removal.
2
Mount
3
Upper spring seat
