Touareg V8-4.2L (AXQ) (2006)
/Page-1233003.png)
-
Release connector - 1 - and pull off.
-
Remove bolt - 2 - and remove retainer.
-
Pull connector - 3 - out from retainer.
-
Separate connectors from solenoids.
-
Press securing lever toward the right and pull switch upward out of shift mechanism.
Selector Lever Park Position Lock Switch F319, installing
Installation is in reverse order of removal. Pay attention to the following:
-
Route wiring harnesses - 1 - to - 3 - as shown in the illustration.
1 - Wiring harness to shift lock solenoid N110
