volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Guide Wedge and Guide Pin Assembly Overview|Page 16302 > < Guide Wedge and Guide Pin Assembly Overview|Page 16300
Page 1
background image

Trunk / Liftgate Latch: Service and Repair
Guide Wedge and Guide Pin, Adjusting

Rear Lid

Guide Wedge and Guide Pin, Adjusting

-

The guide pin must be adjusted in the rear lid before adjusting  the guide wedges.

-

Tighten the bolts - 1 - and - 5 - just  far enough until the bolt heads touch the guide wedge - 6 - and  guide pin - 2 -.

-

It must be possible to adjust guide wedges and guide pin in oblong  holes using little force.

-

Pull out guide wedges - 6 - on rear lid -  4 - as far as possible before adjusting - arrow -. 

-

To adjust, close rear lid in the center using light pressure.

-

Open the rear lid and tighten bolts - 1 - and -  5 - to 6 Nm.

Guide Wedge and Guide Pin Assembly Overview|Page 16302 > < Guide Wedge and Guide Pin Assembly Overview|Page 16300