Touareg V8-4.2L (BAR) (2007)
/Page-3669003.png)
-
Remove left side wall trim.
-
Remove left sill panel strip.
-
Remove bolts - 2 - and remove bracket - 1 -.
-
Fold up noise insulation - 3 -.
-
Disconnect the connector - 6 -.
-
Protect surrounding components from any hydraulic oil that may leak out.
-
Pull clips - 5 - up - arrow a - until lines - 7 - can be loosened in - direction of arrow b -.
Installation
‹› A new bolt must always be used to install bracket.
