Touareg V8-4.2L (BAR) (2007)
/Page-3708010.png)
-
Place a wood block - A - of approximately 300 mm in length in each bracket of the spindles (10 - 222 A /11).
Brackets must point backward, while doing this.
-
Tighten wing nuts for the spindles, wood blocks - A - must be supported against subframe - B -.
-
Remove bolts - 1 and 2 -.
-
At these two points, thread in locating pins (T10300) up to marking - B - on the locating pins by hand.
