Touareg V8-4.2L (BAR) (2007)
Lines and wires must not be mixed up when connecting!
-
Check whether color marking is present on front in driving direction. If no longer present, apply a new one.
-
When loosening hydraulic lines, counter hold using open end wrench.
Continuation for All
-
Remove strut bolt - arrow - from wheel bearing housing.
-
Place engine and transmission jack (VAG 1383 A) under subframe.
-
Remove two remaining attachments bolts for subframe.
Lower subframe (second mechanic required), note the following when doing this:
‹› Lower only as far as necessary
‹› Note electrical wires and brake hoses
‹› Lower subframe evenly from body
-
Lower subframe.
To press out bonded rubber bushings, covers must be pulled out of inner core of mount first.
-
Install tools as shown in the illustration.