Touareg V8-4.2L (BAR) (2007)
-
Insert protective cap - A - onto Assembly Tool for Protective Cap T10146/1 - 1 -.
-
Press the protective cap with the Assembly Tool for Protective Cap T10146/1 - 1 - and the Piston Resetting Tool T10145 - 2 - into the brake
caliper applying equal pressure all around.
Check seating of protective caps:
-
Protective cap must no longer be able to be pulled from brake caliper by hand.
-
Carefully install the protective cap onto the piston, and then secure it in this position using the Trim Removal Wedge 3409 - 2 -.
Do not angle piston, to avoid damaging the seal sleeve.
-
Blow compressed air (max. 3 bar) on to protective cap - 1 -. Protective cap springs onto piston.