Touareg V8-4.2L (BAR) (2007)
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with Assembly Paste G 052 150 A2 before inserting.
-
Install sealing ring in brake caliper.
-
Insert protective cap - A - into Assembly Tool T10146/4 - 1 -.
-
Press the protective cap with the Assembly Tool T10146/4 - 1 - and the Piston Resetting Tool T10145 - 2 - into the brake caliper applying equal
pressure all around.
Ensure protective caps are seated:
-
Protective cap must no longer be able to be pulled from brake caliper by hand.