Touareg V8-4.2L (BAR) (2007)
*
The threaded pins (in shaft and at sides) are set and must not be adjusted!
Brake Line Repairing Instructions
Brake Line Repairing Instructions
-
Disconnect affected brake line from the brake caliper or wheel cylinder and collect draining brake fluid and dispose of it correctly.
-
Cut the brake line at the appropriate location (straight, accessible part) with line cutter - 2 -.
-
Remove the piece to be exchanged.
-
Lubricate the brake line surface.
-
Clamp the brake line with the self grip pliers - 4 - so that 50 mm of the plastic clamping jaws show.
-
Install the shearing tool - 3 - in a drill motor and place it on the brake line.