Touareg V8-4.2L (BAR) (2007)
/Page-819003.png)
-
Install the ATF inspection plug with a new seal.
Tightening Specifications
‹› M10 bolt: 20 Nm
‹› M24 bolt: 70 Nm
If the ATF level is too low, only the ATF in the filler hole drains out after the sealing plug is removed.
-
Wait approximately 30 seconds and if no more ATF drips out, top it off.
-
Add ATF using ATF filler tool (VAG 1924) until ATF exits from the check hole.
Allow ATF to drain until it drips.
