Touareg V8-4.2L (BAR) (2007)
Housing securing mechanism can be released by disengaging a " slider" - arrow -.
Primary Lock
The primary lock is the locking mechanism of one individual crimp contact in terminal housing.
If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to
--> [ Secondary Lock ].
The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the
secondary lock.
‹› Round connector systems, refer to --> [ Round Connector Systems ]
‹› Flat connector systems, refer to --> [ Flat Connector Systems ]
‹› Special connector systems, refer to --> [ Special Connector Systems ]
The application of the correct release tools to the respective locks can be found in the table in user's instructions for VAS 1978/35.
Round Connector Systems
‹› If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts.
Refer to --> [ Secondary Lock ].
-
Guide the release tool which fits the terminal housing into release channel on terminal housing.
-
Grasp contact at wire and push it gently into terminal housing - arrow -.