Touareg V8-4.2L (BAR) (2007)
-
Using a jumper wire, connect the Engine Coolant Temperature (ECT) Sensor (G83) electrical harness connector terminals 1 to 2.
-
Check the value indicated on the scan tool display.
If the value jumps to approx. 140.0° C
-
End diagnosis and switch the ignition off.
-
Replace the Engine Coolant Temperature (ECT) Sensor (G832).
If indication remains at approx. -40.0° C:
°Testing if display approx. 140.0 C:
-
Disconnect the Engine Coolant Temperature (ECT) Sensor (G83) electrical harness connector - 1 -.