Touareg V8-4.2L (BAR) (2007)
-
End diagnosis and switch ignition off.
If the specified value was obtained, but the DTC memory has a DTC concerning the Mass Air Flow (MAF) Sensor 2 (G246):
-
Check the voltage supply of the Mass Air Flow (MAF) Sensor 2 (G246).
If specified value was not obtained:
-
Check the wiring of the Mass Air Flow (MAF) Sensor 2 (G246).
Checking voltage supply
-
Disconnect the Mass Air Flow (MAF) Sensor 2 (G246) electrical harness connector - 3 -.
-
Start the engine and let it run at idle.
-
Using a multimeter, check the Mass Air Flow (MAF) Sensor 2 (G246) electrical harness connector terminal 3 to engine Ground (GND).
Specified value: battery voltage.
-
Switch the ignition off.
If specified value was not obtained: