volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Front Passengers Seat Occupied Sensor G128, Removing and Installing|Page 14379 > < Front Passengers Seat Occupied Sensor G128, Removing and Installing|Page 14377
Page 6
background image

1

-

Upholstery of front seat cushion

2

-

Seat Occupied Recognition Pressure Sensor G452

3

-

Pressure hose

4

-

Seat Occupied Recognition Mat

5

-

Seat Occupied Recognition Control Module J706

6

-

Front seat wiring harness

CAUTION:  Read and follow instructions for use on package of repair set. Misapplication may lead to malfunction of system.

Passenger Occupant Detection System (PODS) (USA Only) Components, Vehicles With Power Seat
Adjustment, Removing

Passenger Occupant Detection System (PODS) (USA Only) Components, Vehicles With Power Seat Adjustment, Removing

CAUTION:  Observe safety precautions when working on seat occupied recognition.

NOTE:

-

Seat cushion, mat for seat occupied recognition, control module and pressure sensor must only be replaced together. Components are
complementary and must not be separated!

-

Only disconnect wiring harnesses mentioned in the following description!

-

Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.

-

Perform the following seat adjustment:
-

Seat height: highest position

-

Seat tilt: highest position

-

Remove belt anchor.

-

Remove seat rail covers.

-

Remove 12-way seat.

-

Attach the seat to the fixture for seat repair VAS 6136.

-

Remove 12-way seat backrest hinge trim.

-

Remove 12-way seat trim.

-

Remove side hooks -1- and -2- outward and remove Memory Seat/Steering Column Adjustment Control Module J136 -3-from mounts.

Front Passengers Seat Occupied Sensor G128, Removing and Installing|Page 14379 > < Front Passengers Seat Occupied Sensor G128, Removing and Installing|Page 14377