Touareg V8-4.2L (BAR) (2007)
-
Remove bracket - 1 - to obtain better access.
-
Now remove Engine Coolant Temperature (ECT) sensor (G62) - 2 -.
‹› Place a cloth beneath to catch draining coolant.
-
Remove retaining clip and remove ECT sensor (G62).
Installing
Installation is performed in reverse order of removal, noting the following:
‹› Replace O-ring.
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Insert ECT sensor (G62) as quickly as possible so that coolant does not drain unnecessarily.
-
Ensure sensor retaining clip is seated securely.
-
Check coolant level, add as required. Refer to --> [ Check coolant level. ] See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Procedures.