Touareg V8-4.2L (BAR) (2007)
Ignition Switch: Service and Repair
Access/Start Authorization
Ignition Key Emergency Release
Access/Start Authorization
Ignition Key Emergency Release
If the voltage supply in the vehicle has been interrupted, the ignition key can be removed by actuating the emergency release.
-
Turn the ignition key to the "OFF" position.
-
Depress the push-button - arrow - with a screwdriver and hold.
-
The ignition key may now be removed.
Access/Start Authorization Switch
Access/Start Authorization
Access/Start Authorization Switch
CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool
(plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.
‹› Access/Start Authorization Switch (E415) with integrated lock cylinder, integrated Anti-Theft Engine Disable Sensor (D1) and integrated
Ignition Switch Key Lock Solenoid (N376) is one component and can only be replaced completely.
Special tools, testers and auxiliary items required
‹› Wrench (T10152)
‹› Release lever (T10039)
‹› Wedge (T10039/1)
Removing
CAUTION!
When disconnecting battery, procedure must always be followed as described in the repair information --> [ Battery, with Auxiliary
Battery or Two-Battery Layout, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and Replacement/Battery,
with Auxiliary Battery or Two-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will result in the deactivation
of Main Battery Switch -E74- and subsequent damage to electrical system components.
-
Disconnect battery --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and