Touareg V8-4.2L (BAR) (2007)
Removing right mounting bracket
-
Disengage harness connector from Engine Control Module (ECM) - 2 - and disconnect it.
-
Remove control module.
-
Remove bracket for Engine Control Module (ECM).
Bolts for mounting bracket (3x) are now accessible.
Remove bolt - arrow -.
Remove bolts - arrows -.
Continuation for both sides
-
Remove mounting bracket.
-
Remove level control system sensor from upper transverse link and remove from mounting bracket.
Installing
Installation is in reverse order of removal, with special attention to the following: