Touareg V8-4.2L (BAR) (2007)
7. Threaded nut M20 (T10205/8-2)
8. Press piece (T10205/9)
-
Connect pressure gauge w/connection (VAS 6179/1) between hydraulic cylinder (VAS 6178) and hydraulic line of hydraulic cylinder (VAS
6178).
Pressures, described in the following, apply only to the hydraulic cylinder (VAS 6178).
Shortly before pressing-in procedure is completed, readout pressure must be between 100 and 190 bar.
Maximum pressure must not exceed 310 bar.
-
Press wheel bearing in until stop.
-
Install circlip.
Wheel Hub, Installing
-
Mount tools as depicted in illustration.
Please note:
Offset of thrust piece (T10205/6) must point toward rear final drive.
1. Threaded rod M20 (T10205/8-1)
2. Threaded nut M20 (T10205/8-2)
3. Hydraulic press (VAS 6178) with pressure head (T10205/13)
4. Press piece (T10205/10)
5. Threaded rod M20 (T10205/8-1)
6. Threaded nut M20 (T10205/8-2)