volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Valve Body, A/T|Description and Operation|Page 8494 > < Valve Body, A/T|Description and Operation|Page 8492
Page 3
background image

If the manufacturers test box is not being used. Perform the following  step.

-

Remove the Transmission Control Module (TCM) (J217). Refer to --> [ Transmission Control Module, Replacing ] See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Component Tests and General Diagnostics/Transmission Control Module,
Replacing.

-

Using a multimeter, check the Solenoid  Valve electrical harness connector terminals to theTransmission  Control Module (TCM) (J217) electrical
harness connector  T52 terminals for an open circuit.

Specified value: 1.5 ohms Max.

If the specified value was not obtained:

-

Check the wiring for a short circuit to each other, Battery (+),  and Ground (GND).

Valve Body, A/T|Description and Operation|Page 8494 > < Valve Body, A/T|Description and Operation|Page 8492