Touareg V8-4.2L (BHX) (2004)
-
Be careful to guide the wiring as well.
-
Pull subframe out of outer door panel toward hinge side - arrow b -.
-
When doing this, make sure that door lock does not catch in outer door panel.
-
Drill out both rivets - 1 -.
-
Disconnect the connectors - 3 - and press the rubber grommet - 6 - out of the subframe.
-
The angle bracket - 2 - is fastened to the door lock - 4 - with a rivet - 5 - and a locking tab.
‹› The angle bracket is not part of the door lock delivery package. The angle bracket must be replaced every time it is removed.
-
Unclip the release - 1 - from the door lock.