Touareg V8-4.2L (BHX) (2004)
-
Remove top bolts - 4 - on lock carrier.
-
Remove bolts - 5 - on bracket for lock carrier.
-
Remove the only one bolt - 1 - each on left and right longitudinal members.
-
Screw in special tool guide rods (T 10093) at left and right.
-
Remove remaining bolts - 1 - and - 2 - at longitudinal members.
-
Lock carrier - 1 - can be pulled toward front approximately. 10 cm in direction of arrow on special tool guide rods (T 10093).
Service Position, Resetting
-
When resetting the lock carrier, make sure the intake pipes - 1 - are properly seated on the air filters - 2 - near the wheel housing - arrow -.
To install, perform the steps used for removal in reverse order.
-
Align lock carrier at longitudinal members and between fenders.
Vehicles with Charge Air Cooler
-
Disengage connector coupling - 2 - and disconnect pressure hoses - 1 - upward in direction of arrow from coupling.