volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Hydraulic Assembly, Traction Control|Locations|Page 9418 > < Hydraulic Assembly, Traction Control|Locations
Page 2
background image

‹› Marked on hydraulic unit with - VR -.

7

Brake line

‹› To left front brake caliper.

‹› Marked on hydraulic unit with - VL -.

8

Brake line

‹› Via intermediate piece toward right rear brake caliper.

‹› Marked on hydraulic unit with - HR -.

9

Intermediate piece

10

Bracket

‹› Allocation.

11

Bolt, 5 Nm

12

Bolt, 8 Nm

13

Buffer

14

Gasket

‹› For brake booster.

15

Tandem brake booster

‹› Including brake pressure release solenoid (F84) and brake pressure magnetic coil (N247) (not interchangeable).

‹› On gas engines, vacuum is supplied from intake manifold.

‹› Vehicles with gas engine and automatic transmission are equipped  with a brake system vacuum pump.

‹› On Diesel engines, a vacuum pump is installed for vacuum creation. 

‹› Function test:

-

With engine switched off, press brake pedal firmly several times  (to deplete vacuum in tool).

-

Press and hold brake pedal with average foot pressure and start  engine. If brake booster is working properly, pedal will be felt to give noticeably 
under foot (booster assistance becomes effective).

‹› Replace as a unit in the event of malfunction (previously, check  all vacuum lines).

‹› Removing and installing, refer to --> [ Brake Booster ] See: Power Brake Assist/Vacuum Brake Booster/Service and Repair/Brake Booster.

16

Seal

17

Brake booster membrane position sensor (G420)

‹› Removing and installing, refer to --> [ Brake Booster Membrane Position Sensor ] See: Vacuum Brake Booster Diaphragm Position

Sensor/Service and Repair.

‹› Discontinued from calendar week 48/06.

18

Snap ring

19

Sealing plugs

‹› Connection for vacuum hose.

Hydraulic Assembly, Traction Control|Locations|Page 9418 > < Hydraulic Assembly, Traction Control|Locations