Touareg V8-4.2L (BHX) (2004)
-
Attach bleeder hose of bleeder bottle to left front brake caliper bleeder valve and open bleeder valve.
-
Install brake pedal loading device (VAG 1869/2).
-
Close front left bleeder valve.
-
Place sufficient lint free cloths under the control module and hydraulic unit.
Make sure that brake fluid does not come in contact with the terminals.
-
Identify brake lines and remove at hydraulic unit and intermediate piece.
-
Seal brake lines and threaded holes with sealing plugs (1H0 698 311 A).
-
Remove hydraulic unit bolts- arrows - from bracket.
-
Remove hydraulic unit upward together with control module.
Control Module, Removing from Hydraulic Unit
-
Place hydraulic unit with control module on a clean, level surface.
-
Remove external Torx bolts - arrows -.