Touareg V8-4.2L (BHX) (2004)
-
Turn the spindle to the stop in flaring tool.
-
Turn the spindle back.
-
Loosen screws diagonally.
-
Remove the brake line from the flaring tool, clean and check the brake line and flared head.
Briefly rinse part of the brake line remaining in vehicle.
-
Connect the brake charger/bleeder unit (VAS 5234), place bleeder container hose on flanged head of brake line and run brake charger/bleeder unit
(VAS 5234) briefly until some brake fluid runs through.
-
Blow out the brake line to be inserted with compressed air.
-
Join brake lines with a connecting piece - E -.