Touareg V8-4.2L (BHX) (2004)
-
Turn thrust collar and press it onto end of crankshaft so that the marked surface faces the engine.
-
Install toothed belt crankshaft sprocket, using a new centered bolt. Torque specification: 200 Nm plus an additional 1/2 (180°) additional turn.
-
Install toothed belt. --> [ Toothed Belt, Removing, Installing and Tensioning ] See: Timing Components/Timing Belt/Service and Repair/Removal
and Replacement/Toothed Belt, Removing, Installing and Tensioning
-
Install ribbed belt --> [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt.
-
Install noise insulation pan.