Touareg V8-4.2L (BHX) (2004)
Blower Control Diagnostic Sensor: Service and Repair
Front Blower Regulation Sensor
Front Blower Regulation Sensor
Removing
-
Open glove box.
On first repair:
-
Cut out pre-stamped area - arrows - with a knife.
‹› The blade length should not exceed 15 mm, to prevent damage to the cables located behind.
-
On second repair, unclip cover
-
Disconnect connector.
-
Remove bolts - 1 -.
CAUTION!
Contact with a hot exhaust system can cause severe burns.
The Front Blower Regulation Sensor (Bitron) may be hot.
Allow Front Blower Regulation Sensor (Bitron) to cool before removing.