volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Instruments - Clock Runs Too Fast/Gains Time|Page 18428 > < Instruments - Clock Runs Too Fast/Gains Time
Page 2
background image

Warranty

Required Parts and Tools

No special Tools Required

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair
Manuals for the latest information.

Service

Note:

Non-observance of the following points may lead to control module failure! VAS 5051 or VAS 5052 must always be connected to the approved
power supply at the approved voltages. Under no circumstances should the power supply be interrupted or the diagnostic connector unplugged during
the flash procedure. Any appliances with high electromagnetic radiation (i.e. mobile phones) must be switched OFF.

^

Ensure the following vehicle requirements are met:

^

Connect vehicle to a powered Volkswagen approved Midtronics/InCharge 940 (INC-940) tester/charger

Instruments - Clock Runs Too Fast/Gains Time|Page 18428 > < Instruments - Clock Runs Too Fast/Gains Time