Touareg V8-4.2L (BHX) (2004)
Brake Light Switch: Adjustments
Brake Light Switch and Brake Pedal Switch
--> [ Previous Version ]
--> [ New Version ]
‹› Vehicles from 11.06 do not have a brake light switch. The signal is generated by the brake pressure sensor 1 (G201) and brake pressure release
solenoid (F84).
Previous Version
‹› After removing the old brake light switch (see illustration N46-0359) it should be replaced with a new one (see illustration N46-10145).
‹› Distinguishing characteristics.
Removing
-
Remove the driver side trim.
-
Disconnect connector from brake light switch.
The brake light switch must only be removed when plunger is pressed (brake pedal not operated), otherwise the retainer on the brake light switch will
be damaged.
-
Remove brake light switch by turning 45° to the left.
Installing, Adjusting and Locking
Because the old brake light switch is no longer used.
New Version
‹› Only use a NEW brake light switch.
‹› The most noticeable difference is the new brake light switch has a clear rounded end on the plunger head- A -.