Touareg V8-4.2L (BHX) (2004)
Fuse Block: Service and Repair
Fuse Holder
Fuse Holder
CAUTION!
When disconnecting and connecting the battery, always perform the work procedure as described in the repair information --> [ Battery,
One-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, One-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will result in the deactivation of
Main Battery Switch -E74- and subsequent damage to electrical system components.
‹› In Touareg, there are two fuse holders installed, located at left and right on instrument cluster.
‹› The illustration depicts work sequence "removing left fuse holder ". Work procedure for removing right fuse holder is identical.
Removing
CAUTION!
When disconnecting battery, procedure must always be followed as described in the repair information --> [ Battery, with Auxiliary
Battery or Two-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, with Auxiliary Battery or Two-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will
result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.
-
Disconnect battery --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and
Repair/Removal and Replacement/Battery, One-Battery Layout, Disconnecting and Connecting.
-
Remove left side cover of instrument cluster
-
Remove lower storage compartment on driver side.
-
Remove both mounting bolts - arrows - and remove fuse holder - 1 - toward inside.
Installing
Install in reverse order of removal.