Touareg V8-4.2L (BHX) (2004)
Cylinder bank 2
-
Disconnect the 3-pin connectors from Camshaft Position (CMP) Sensor 2 (G163) (arrow).
Cylinder bank 1 and 2
‹› Cylinder bank 1 = in direction of travel, right.
‹› Cylinder bank 2 = in driving direction, left.
‹› Before disconnecting harness connectors, mark allocation to component.
Checking voltage supply
-
Connect multimeter between terminal 1 (B+) and 3 (Ground -GND-) for voltage measurement for the respective connector for hall sensor.