Touareg V8-4.2L (BHX) (2004)
/Page-1470005.png)
-
Remove nuts - 1 - from cover. If necessary, unbolt backrest support - 2 - or support mounting: --> Body Interior 72 Removal and Installation
-
Connect current clamp of multimeter (V.A.G 1715) to the wire of the 4-pin connector contact - 1 - - arrow - from wiring harness to right fuel
delivery unit.
-
Start engine and run at idle speed.
-
Measure current draw of fuel pump. Specified value: max. 11 amps.
If current draw is exceeded:
