Touareg V8-4.2L (BHX) (2004)
^
The tester requests you to switch the ignition OFF.
-
Switch ignition OFF.
IMPORTANT!
^
Wait at least 20 seconds before switching the ignition back ON (failure to wait at least 20 seconds may damage the Control Module).
After waiting 20 seconds:
-
Switch ignition ON.
After switching ignition ON, the Control Module has been re-initialized, however, fault memories must now be erased.
-
Select the "Continue button"
Fault memories, erasing after "Update - Programming" (flashing)
Due to the CAN bus system, fault messages will be stored in various Control Modules during programming.
-
To erase ALL fault memories:
-
Confirm by selecting the > button.
^
Erase fault memories takes approx. 15 minutes.
Once fault memories have been erased: