Touareg V8-4.2L (BHX) (2004)
Note:
Approx. flashing time is 3 minutes.
NOTE:
If, during the "Update - Programming", a fault message is displayed:
-
Confirm that VAS 5051 or VAS 5052 diagnostic tool power supply is adequate and that ALL appliances with high electromagnetic radiation (i.e.
mobile phones) are switched OFF.
-
The "Update - Programming" (flashing) process must then be started from the beginning using the "Repeat" button (arrow). DO NOT use the
"Cancel" button.
IMPORTANT!
On NO occasion should the "Cancel" button be selected.
Once "Update - Programming" (flashing) is complete:
^
Similar screen appears.
^
New Control Module Part Number and updated software level is displayed at (arrows).
Once "Update - Programming" (flashing) is complete, the control module must be re-initialized.
^
Select the > button.