Touareg V8-4.2L (BHX) (2004)
Body Control Module: Programming and Relearning
Comfort System Central Control Module, Adapting
Comfort System Central Control Module, Adapting
The following functions can be adapted:
‹› Individual door opening
‹› Automatic locking at > 15 km/h
‹› Automatic unlocking when ignition key is removed
‹› Unlock return message via access/start authorization
‹› Unlock return message via radio remote control
‹› Unlock return message via key switch
‹› Lock return message via access/start authorization
‹› Return message for locking via radio remote control
‹› Return message for locking via key switch
‹› Return message for ATWS activated
‹› Country selection for the intelligent alarm horn
‹› Deactivating comfort operation via radio remote control
‹› Deactivating ATWS alarm delay when opening driver door
‹› Adaptations listed above are dependent on vehicle equipment level and market version.
-
Connect Vehicle Diagnosis, Testing and Information System (VAS 5051A).
-
In Vehicle Diagnostic, Testing and Information System (VAS 5051A), select operating mode "Guided Fault Finding ".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
‹› Body
‹› Body repair procedures
‹› 01 - On Board Diagnostic (OBD) capable systems
‹› Comfort System Central Control Module
‹› Functions
‹› Adapting Comfort System Central Control Module -J393-
Comfort System Central Control Module, Coding
Comfort System Central Control Module, Coding
-
Connect Vehicle Diagnosis, Testing and Information System (VAS 5051A).
-
In Vehicle Diagnostic, Testing and Information System (VAS 5051A), select operating mode "Guided Fault Finding ".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence: